Finally, a dedicated guitar speaker for amp modellers and IRs. The F12-X200 is a truly full range driver that delivers a frequency response from 60Hz all the way up to 20kHz, the higher frequency part of the signal is reproduced using a Celestion compression driver which has been integrated using a high quality crossover circuit. This enables the F12-X200 to reproduce the full spectrum of audible frequencies, for the most accurate output possible, whatever your environment and set-up.

The F12-X200's response is remarkably neutral, with Celestion technology built in to ensure there are no unwanted colourations that can overpower the input signal. However, the lighter moving mass and straighter sided cone of the type commonly used with guitar speakers gives the X200 the feel and live response of a traditional guitar speaker, delivering all the physical feedback you'd expect from playing through a conventional guitar rig.

Used with amp modellers or IRs, in a backline cab or a wedge monitor, on stage or in the studio, it doesn't just sound like great guitar tone, it feels like it too.

General Specifications

Nominal diameter 12"

Power rating 200W

Nominal impedance 8Ω

Sensitivity 97dB

Chassis type Pressed steel

Voice coil diameter 2"

Voice coil material Round copper

Magnet type Ceramic

Frequency range 60 - 20,000Hz

Resonance frequency, Fs 75Hz

Mounting Information

Cut-out diameter 11.1", 283mm

Diameter 12.2", 309mm

Magnet structure diameter 6.7", 170mm

Mounting slot PCD 11.7", 297mm

Number of mounting slots 8

Overall depth 6.5", 165mm

Unit weight 9.1lb, 4.1kg

8 Ω FREQUENCY RESPONSE

Celestion F12-X200 12" 200 Watt 8ohm Guitar Speaker

Have a question?