Here are a few comanies that prefer to load their amps with GWS speaker

 

 

Described as having an English sound with an American twist, the PRS “30” amplifier features a quartet of EL84 power tubes and offers both vintage tones and modern versatility. The PRS “30” is handmade in Stevensville, Maryland utilizing thick pc boards for consistency. All pots, jacks, power tube sockets and switches are chassis mounted and shielded wire is used where critical. Check out the PRS 30 which uses the WGS ET65.

 

Two-Rock builds some truly amazing tube amps. They have a custom speaker built by WGS. The 12-65B was built to Two-Rock specs and is only available directly from them. Some of Two-Rock's artists include John Mayer, Eric Gales, Matt Schofield, & Brad Whitford.

 

Suhr has a facility with state of the art equipment combined with old world style craftsman to make some of the best guitars and amps available.

 

"At Port City we believe in the concept of innovation. From the patented design of the Port City Wave cabinets, to the unique circuit design of our amplifiers, no detail is ignored. Our products not only look different, they sound different. We invite your to explore what Port City Amplifiers has to offer you."

 

Reeves Amplification offers hand wired mil-spec tube amps based on the Dave Reeves era Hiwatts.

Greg Howard (guitar tech), Ossie Ahsen (amp tech, designer, and builder) and Brad Whitford (guitarist of Aerosmith) joined forces to create some amazing sounding amps. Check them out!

Kendrick Amplifiers has been hand building some of the best tube amps availabel since 1989. Gerald Weber is recognized as one of the leading authorities on tube amp design and repair.

 

Goodsell Amplifiers is known for making award winning amplifiers in Atlanta, GA. All Richard's amps are extremely musical and responsive. Check them out.

 

Shaw amps are hand built one at a time using a mixture of new and vintage components. When available we use vintage Hammond transformers and chassis and then build up each amp from scratch using carbon film resistors, Sozo, Sprague,and silver mica tone caps, JJ’s electrolytics, micalex tube sockets, Cliff and Switchcraft jacks. Most all of our amps are true point to point construction with no turret boards and very little wire. We go to great pains to keep hum and noise to a minimum. Tolexed cabinets are made from birch plywood. Natural wood cabinets are finger-jointed from Mahagony, Pine, Walnut, or other special order woods. This blend of old and new, as well as vintage hand-wired construction, make each Shaw a unique, one-of-a-kind creation.

 

Jeff Bober, designer of the now famous Budda Amps has recently founded his new company East Amplification. Jeff has designed two new ground-breaking amp models to kick off this new line.

 

Since 1993, Victoria has been building amps that faithfully capture the sound of tweed amps of the late '50s.

 

Vintage Sound Amps is located in Gulf Breeze, Florida. Their philosophy in amp building is very simple –they strive to build the cleanest sounding amplifiers using vintage mid-60’s Black Face circuitry (with modifications unique to Vintage Sound) using the best components available today.

All amps are point-to-point hand-wired. All cabinets are custom built for Vintage Sound Amps and built with high quality pine using dove-tail joints. They use top quality filter caps and electrolytics, carbon comp resistors, Orange Drop tone caps, solid core pushback wire, JJ and Ruby Tubes, custom hand wound transformers Made in the USA with your choice of Warehouse (WGS) or Weber speakers all Made In USA. Optional accessories include two-button footswitch and custom padded cover by D2F. All amps include a dated tube chart on the inside of the cabinet. All amplifier chassis and cabinets are personally signed and dated.

 

Great Dane Amplification builds custom designed hand built tube amps as well as offering tube amp and guitar repair.

WGS dealer and cabinet builder located in Germany.

 

 

Granger's mission is to build high performance, handcrafted vacuum tube amplifiers, using only the finest components and time-tested designs. Granger amps are custom made in the USA!

We are a Full custom shop located in Orlando, FL. Although Aftershock is a relatively new company we are not new to the industry or woodworking and finishing. 3rd generation builder, finisher and owner, Brandon Blankenship started helping his dad in his cabinet shop when he was 5 years old. And has been in the industry ever since. that was 30 years ago. Woodworking is in his blood, Even the name Blankenship itself was derived from skilled craftsmen who built "Ships" and worked with wood planks. We are carrying that torch on today and concentrating on quality, hand built Old world Craftsmanship. We have a passion for what we do, and for music. Brandon has been playing guitar for 21 years and has always been striving for the best sound possible. Always expiermenting with speakers,cabinets,amps, effects, pedals trying to satisfy his desire for great tone. Finally back in 2007 he decided to build his own speaker cabinets putting to use his skills to create a better speaker cabinet and also  his relentless desire for design and style, Not being happy playing the same old boring black tolex cabinets everybody else had. He wanted more color, choices, and options. When you use one of our products you not only are getting generations of woodworking skill and quality, the best sound and materials available, but also endless options to make your cabinet truly unique and personalized to you, one of a kind. When you work with us, it is exactly that. You will have a one on one relationship the whole way through the process. We make sure you are getting exactly what you want and are nothing but blown away by our products.

Rocket Cab Solid Pine Guitar Cabinets The Mission: To superbly craft a no compromise guitar speaker enclosure capable of producing incredible tone, resonance and presence. To build our cabinets in the United States of America and use the highest quality USA materials. To be able to offer them at an outstanding value on investment.

 

Blades build their amps using the finest materials & parts, all HANDMADE in USA & BUILT TOUGH! They take circuits once only available to Elite ROCKSTARS & put them into a cool package with some new ideas!

 

Graefe Designs builds awesome amps using WGS speakers.

 

Nolatone amps are hand bult in Raliegh, NC. Paul uses only high quality components in construction and pays meticulous attention to detail in his workmanship.

 

Red Plate Amps offers amps with singing harmonic sustain. All construction is non-PCB and has the lowest noise floor possible.

Singletone Amplification's goal is to build the best looking and sounding boutique vintage amplifiers. Singletone installs in their amps the finest components, selected tubes and custom handmade transformers. It all happens in Buenos Aires, Argentina.

ARTESOUND amps are constructed of only the highest quality materials: cabinets in 22 mm thick solid wood, aluminium chassis, oversized transformers to avoid stress, selected tubes, polypropylene or paper-in-oil capacitors and carbon composition resistors.

All electric assembly is handmade with the point-to-point technique or turret board construction with specific wires to stand high temperatures. This guarantees that these amps produce high quality sound, exceptional strength and long life.

In addition to this, ARTESOUND amps are also nice to look at. You can be sure that you are not only making a shrewd purchase but also a wise investment in a product that retains its value over time.