Eminence BASSLITE SC10-32 10" 100 Watts 32 ohm Bass Guitar Speaker
- Home
- All Speakers
- Eminence BASSLITE SC10-32 10" 100 Watts 32 ohm Bass Guitar Speaker
Eminence BASSLITE SC10-32 10" 100 Watts 32 ohm Bass Guitar Speaker
Eminence BASSLITE SC10-32 10" 100 Watts
32 ohm Bass Guitar Speaker
Optimized specifically for sealed bass cabinets, the ultra-lightweight Basslite SC10 will take the weight out, but leave the performance in. Featuring a 4 oz. neodymium magnet and 2 inch voice coil, this 10 inch speaker is available in 16 and 32 ohms for your 4x10 or 8x10 rig.
SPECIFICATION | |
Nominal Basket Diameter | 10", 254 mm |
Nominal Impedance* | 32 Ω |
Power Rating* | |
Program Power | 200 W |
Watts | 100 W |
Resonance | 47 Hz |
Usable Frequency Range | 50 Hz - 4.5 kHz |
Sensitivity* | 94.2 dB |
Magnet Weight | 4 oz. |
Gap Height | 0.28", 7.1 mm |
Voice Coil Diameter | 2", 51 mm |
THIELE & SMALL PARAMETERS | |
Resonant Frequency (fs) | 47 Hz |
DC Resistance (Re) | 25.1 Ω |
Coil Inductance (Le) | 1.46m H |
Mechanical Q (Qms) | 7.1 |
Electromagnetic Q (Qes) | 0.59 |
Total Q (Qts) | 0.55 |
Compliance Equivalent Volume (Vas) | 79.97 liters / 2.82 cu.ft. |
Peak Diaphragm Displacement Volume (Vd) | 154 cc |
Mechanical Compliance of Suspension (Cms) | 0.47 mm/N |
BL Product (BL) | 17.32 T-M |
Diaphragm Mass Inc. Airload (MMs) | 24 grams |
Efficiency Bandwidth Product (EBP) | 80 |
Maximum Linear Excursion (Xmax) | 4.4 mm |
Surface Area of Cone (Sd) | 350.1 cm2 |
Maximum Mechanical Limit (Xlim) | 9 mm |
MOUNTING INFORMATION | |
Recommended Enclosure Volume | |
Sealed | Acceptable |
Vented | Acceptable |
Driver Volume Displaced | 0.03 cu.ft. / 0.84 liters |
Overall Diameter | 10.08", 256 mm |
Baffle Hole Diameter | 9.18", 233.2 mm |
Front Sealing Gasket | Yes |
Rear Sealing Gasket | Yes |
Mounting Holes Diameter | 0.25", 6.4mm |
Mounting Holes B.C.D. | 9.66", 245.4mm |
Depth | 4.25", 108 mm |
Net Weight | 3.5 lbs, 1.59 kg |
Shipping Weight | 4.6 lbs, 2.09 kgs |
MATERIALS OF CONSTRUCTION | |
Coil Construction | Copper voice coil |
Coil Former | Polyimide former |
Magnet Composition | Neodymium magnet |
Core Details | Non-vented core |
Basket Materials | Pressed steel basket |
Cone Composition | Curved paper cone |
Cone Edge Composition | Cloth cone edge |
Dust Cap Composition | Solid composition felt dust cap |
Do you have any question?
info@thespeakerfactory.com.au
+61 457 205 573
Mon - Fri: 9:00am - 4:00pm
- +61 457 205 573
- info@thespeakerfactory.com.au